產品介紹
產品應用
關於福斯
最新消息
詢問清單
聯絡我們
產品介紹
   首頁 | 產品介紹 | 固緯量測儀器 | 電源供應器 | 可程式 交流 / 直流 電源供應器 ASR-3000 系列 | 可程式交流/直流電源供應器(NEW)
固緯量測儀器
日本 NF儀器
巨孚環測設備
高壓直流電源供應器(國產)
雙儀量測儀器
馬達/線圈測試儀器
擎宏-電源設備
Cosmopia環測設備(日立)
美國HVM200 人體振動計
HIOKI溫度記錄器/超絕緣計
超高精度多通道電池模擬器
各類掌上型量測工具
高壓直流電源供應器(美國)
華儀安規測試儀器
Fluke 福祿克萬用電錶
艾普斯交直流电源供應器
泰琪環測設備
可調式自耦變壓器
YOKOGAWA溫度記錄器
安規認證基本知識介紹
防水試驗機
校正服務
IP防水等級詳細劃分
儀器/環測設備規格選擇
 
 
ASR-3000系列
可程式交流/直流電源供應器(NEW)

ASR-3000 系列 是一款 AC + DC 電源供應器。

包含5款機型，分別是

  • ASR-3200 (2 kVA)
  • ASR-3300 (3 kVA)
  • ASR-3400 (4 kVA) 
  • ASR-3400HF (頻率可達5kHz)
  • ASR-3500 (5 kVA) 
  說明

ASR-3000 系列 是一款 AC + DC 電源供應器。

包含5款機型，分別是

 

  • ASR-3200 (2 kVA)
  • ASR-3300 (3 kVA)
  • ASR-3400 (4 kVA) 
  • ASR-3400HF (頻率可達5kHz)
  • ASR-3500 (5 kVA) 

 

ASR-3000 系列 具有高速的電壓上升及電壓下降時間(≦100 us)；

不僅在交流輸出時提供額定功率輸出，也可以在直流輸出時提供額定功率輸出。

 

ASR-3000輸出模式有10種模式可以選擇包含

  1. 交流電源輸出模式 (AC-INT Mode)
  2. 直流電源輸出模式 (DC-INT Mode)
  3. 交直流電源輸出模式 (AC+DC-INT Mode)
  4. 外部交流信號源模式 (AC-EXT Mode)
  5. 外部交直流訊號源模式 (AC+DC-EXT Mode)
  6. 外部交流信號疊加模式 (AC-ADD Mode)
  7. 外部交直流信號疊加模式 (AC+DC-ADD Mode)
  8. 外部交流信號同步模式 (AC-SYNC Mode)
  9. 外部交直流信號同步模式 (AC+DC-SYNC Mode)
  10. 外部直流電壓控制交流輸出模式(AC-VCA)
特點
 
  • 輸出容量: 2 kVA / 3 kVA / 4 kVA / 5 kVA
  • 交流 (AC) 輸出範圍: 0 ~ 400 Vrms
  • 直流 (DC) 輸出範圍: 0 ~ ± 570 V
  • 頻率輸出範圍可達 999.9 Hz (ASR-3400HF可達5000 Hz)
  • 直流輸出 (100% 額定功率)
  • 量測項目: Vrms、Vavg、Vpeak、Irms、IpkH、Iavg、Ipeak、P、S、Q、PF、CF
  • 電壓及電流諧波分析(THDv, THDi)
  • 具遠端補償功能(Remote Sensing)
  • 保護機制：過電壓OVP、過電流OCP、過功率OPP、過溫度OTP、交流輸入失效偵測及風扇失效警告
  • 支援任意編輯波形功能 (AWF)
  • 序列(Sequence)及模擬(Simulation)功能(具備10組設定)
  • 內建外部控制 I/O 及外部信號輸入
  • 內建輸出繼電器
  • 記憶功能(達10組設定)
  • 內建網頁伺服器
SPECIFICATIONS
  ASR-3200 ASR-3300 ASR-3400 ASR-3500 ASR-3400HF
INPUT RATING (AC rms)
NOMINAL INPUT VOLTAGE 200 Vac to 240 Vac
INPUT VOLTAGE RANGE 180 Vac to 264 Vac
PHASE Single phase, Two-wire
NOMINAL INPUT FREQUENCY 50 Hz to 60 Hz
INPUT FREQUENCY RANGE 47 Hz to 63 Hz
MAX. POWER CONSUMPTION 2500 VA or less 3750 VA or less 5000 VA or less 6000 VA or less 5000 VA or less
POWER FACTOR*1 200 Vac 0.95 (TYP)
*1. For an output voltage of 100 V / 200 V (100 V / 200 V range), maximum current, and a load power factor of 1.
AC MODE OUTPUT RATINGS (AC rms)
 
VOLTAGE		 Setting Range*1 0.0 V to 200.0 V / 0.0 V to 400.0 V
Setting Resolution 0.1 V
Accuracy*2 ±(1 % of set + 1 V / 2 V)
OUTPUT PHASE Single phase, Two-wire
MAXIMUM CURRENT*3 100 V 20 A 30 A 40 A 50 A 40 A
200 V 10 A 15 A 20 A 25 A 20 A
MAXIMUM PEAK CURRENT*4 100 V 120 A 180 A 240 A 300 A 160 A
200 V 60 A 90 A 120 A 150 A 80 A
LOAD POWER FACTOR 0 to 1(leading phase or lagging phase)
POWER CAPACITY 2000 VA 3000 VA 4000 VA 5000 VA 4000 VA
 
 
 
FREQUENCY		 Setting Range AC Mode: 40.00 Hz to 999.9 Hz,
AC+DC Mode: 1.00 Hz to 999.9 Hz		 AC Mode: 40.0 Hz to 5000 Hz,
AC+DC Mode: 1 Hz to 5000 Hz
 
Setting Resolution		 0.01 Hz (1.00 Hz to 99.99 Hz),
0.1 Hz (100.0 Hz to 999.9 Hz)		 0.01 Hz (1.00 Hz to 99.99 Hz),
0.1 Hz (100.0 Hz to 999.9 Hz),
1 Hz (1000 Hz to 5000 Hz)
Accuracy 0.02 % of set (23 °C ± 5 °C)
Stability*5 ± 0.005 %
OUTPUT ON PHASE 0° to 359° variable (setting resolution 1°)
DC OFFSET*6 Within ± 20 mV (TYP)
*1. 100 V / 200 V range              
*2. For an output voltage of 20 V to 200 V / 40 V to 400 V, an output frequency of 45 Hz to 65 Hz, no load, and 23 °C ± 5 °C.
*3. For an output voltage of 1 V to 100 V / 2 V to 200 V. Limited by the power capacity when the output voltage is 100 V to 200 V / 200 V to 400 V.
If there is the DC superimposition, the current of AC+DC mode satisfies the maximum current. In the case of lower than 40 Hz, and the power rating temperature, the maximum current will be decrease.
*4. With respect to the capacitor-input rectifying load. Limited by the maximum current.
*5. For 45 Hz to 65 Hz, the rated output voltage, no load and the resistance load for the maximum current, and the operating temperature.
*6. In the case of the AC mode and 23 °C ± 5 °C.
OUTPUT RATING FOR DC MODE
 
VOLTAGE		 Setting Range*1 -285 V to +285 V / -570 V to +570 V
Setting Resolution 0.1 V
Accuracy*2 ±(1 % of set + 1 V / 2 V)
MAXIMUM CURRENT*3 100 V 20 A 30 A 40 A 50 A 40 A
200 V 10 A 15 A 20 A 25 A 20 A
MAXIMUM PEAK CURRENT*4 100 V 120 A 180 A 240 A 300 A 160 A
200 V 60 A 90 A 120 A 150 A 80 A
POWER CAPACITY 2000 W 3000 W 4000 W 5000 W 4000 W
*1. 100 V / 200 V range              
*2. For an output voltage of -285 V to -28.5 V, +28.5 V to +285 V / -570 V to -57 V, +57 V to +570 V, no load, and 23 °C ± 5 °C.
*3. For an output voltage of 1.4 V to 100 V / 2.8 V to 200 V. Limited by the power capacity when the output voltage is 100 V to 250 V / 200 V to 500 V.
*4. Limited by the maximum current.
OUTPUT VOLTAGE STABILITY
LINE REGULATION*1 0.2 % or less
LOAD REGULATION*2 0.5 % or less (0 % to 100 %, via output terminal)
RIPPLE NOISE*3 1 Vrms / 2 Vrms (TYP)
*1. Power source input voltage is 200 V, 220 V, or 240 V, no load, rated output.
*2. For an output voltage of 100 V to 200 V / 200 V to 400 V, a load power factor of 1, stepwise change from an output current of 0 A to maximum current (or its reverse), using the output terminal on the rear panel.
*3. For 5 Hz to 1 MHz components in DC mode using the output terminal on the rear panel.
OUTPUT VOLTAGE WAVEFORM DISTORTION RATIO, OUTPUT VOLTAGE RESPONSE TIME, EFFICIENCY
 
TOTAL HARMONIC DISTORTION(THD)*1		 < 0.2 % @50/60 Hz < 0.2 % @50/60 Hz <0.2 % @50/60 Hz
< 0.3 % @<500 Hz < 0.6 % @<500 Hz <0.5 % @<500 Hz
< 0.5 % @500.1 Hz to 999.9 Hz < 0.8 % @500.1 Hz to 999.9 Hz <1 % @500.1 Hz to 2000 Hz
    < 2 % @2001 Hz to 5000 Hz
OUTPUT VOLTAGE RESPONSE TIME*2 100 µs (TYP)
EFFICIENCY*3 80 % or more
*1. At an output voltage of 50 V to 200 V / 100 V to 400 V, a load power factor of 1, and in AC mode.
*2. For an output voltage of 100 V / 200 V, a load power factor of 1, with respect to stepwise change from an output current of 0 A to the maximum current (or its reverse).
*3. For AC mode, at an output voltage of 100 V / 200 V, maximum current, and load power factor of 1.
MEASURED VALUE DISPLAY
 
 
VOLTAGE		  
RMS, AVG Value*1		 Resolution 0.1 V
Accuracy*2 For 45 Hz to 65 Hz and DC: ±(0.5 % of reading + 0.5 V / 1 V)
For all other frequencies: ±(0.7 % of reading + 1 V / 2 V)
PEAK Value Resolution 0.1 V
Accuracy For 45 Hz to 65 Hz and DC: ±(|2 % of reading| + 1 V / 2 V)
 
 
 
 
CURRENT		  
 
RMS, AVG Value		 Resolution 0.01 A
 
Accuracy*3		 For 45 Hz to 65 Hz and DC:
±(0.5 % of reading+0.1 A/0.05 A)		 For 45 Hz to 65 Hz and DC:
±(0.5 % of reading+0.15 A/0.08 A)		 For 45 Hz to 65 Hz and DC:
±(0.5 % of reading+0.2 A/0.1 A)		 For 45 Hz to 65 Hz and DC:
±(0.5 % of reading+0.25 A/0.13 A)		 For 45 Hz to 65 Hz and DC:
±(0.5 % of reading+0.2 A/0.1 A)
For all other frequencies:
±(0.7 % of reading+0.2 A/0.1 A)		 For all other frequencies:
±(0.7 % of reading+0.3 A/0.15 A)		 For all other frequencies:
±(0.7 % of reading+0.4 A/0.2 A)		 For all other frequencies:
±(0.7 % of reading+0.5 A/0.25 A)		 For all other frequencies:
±(0.7 % of reading+0.4 A/0.2 A)
 
PEAK Value		 Resolution 0.1 A
Accuracy*4 For 45 Hz to 65 Hz and DC:
±(|2 % of reading| + 0.5 A/0.25 A)		 For 45 Hz to 65 Hz and DC:
±(|2 % of reading| + 0.8 A/0.4 A)		 For 45 Hz to 65 Hz and DC:
±(|2 % of reading| + 1 A/0.5 A)		 For 45 Hz to 65 Hz and DC:
±(|2 % of reading| + 1.3 A/0.65 A)		 For 45 Hz to 65 Hz and DC:
±(|2 % of reading| + 1 A/0.5 A)
 
 
POWER		 Active (W) Resolution 1 W
Accuracy*5 ±(2 % of reading +2 W) ±(2 % of reading +3 W) ±(2 % of reading +4 W) ±(2 % of reading +5 W) ±(2 % of reading +4 W)
Apparent (VA) Resolution 1 VA
Accuracy*5*6 ±(2 % of reading +2 VA) ±(2 % of reading +3 VA) ±(2 % of reading +4 VA) ±(2 % of reading +5 VA) ±(2 % of reading +4 VA)
Reactive (VAR) Resolution 1 VAR
Accuracy*5*7 ±(2 % of reading +2 VAR) ±(2 % of reading +3 VAR) ±(2 % of reading +4 VAR) ±(2 % of reading +5 VAR) ±(2 % of reading +4 VAR)
LOAD POWER FACTOR Range 0.000 to 1.000
Resolution 0.001
LOAD CREST FACTOR Range 0.00 to 50.00
Resolution 0.01
HARMONIC VOLTAGE EFFECTIVE VALUE (RMS) PERCENT (%)
(AC-INT and 50/60 Hz only)		 Range Up to 100th order of the fundamental wave
Full Scale 200 V / 400 V, 100%
Resolution 0.1 V, 0.1%
Accuracy*8 Up to 20th : ±(0.2 % of reading + 0.5 V / 1 V)
20th to 100th : ±(0.3 % of reading + 0.5 V / 1 V)
HARMONIC CURRENT EFFECTIVE VALUE (RMS) PERCENT (%) Range Up to 100th order of the fundamental wave
Full Scale 20 A / 10 A, 100 % 30 A / 15 A, 100 % 40 A / 20 A, 100 % 50 A / 25 A, 100 % 40 A / 20 A, 100 %
Resolution 0.01 A/0.1 A, 0.1%
 
Accuracy*3		 Up to 20th
±(1 % of reading+0.4 A/0.2 A)		 Up to 20th
±(1 % of reading+0.6 A/0.3 A)		 Up to 20th
±(1 % of reading+0.8 A/0.4 A)		 Up to 20th
±(1 % of reading+1 A/0.5 A)		 Up to 20th
±(1 % of reading+0.8 A/0.4 A)
20th to 100th
±(1.5 % of reading+0.4 A/0.2 A)		 20th to 100th
±(1.5 % of reading+0.6 A/0.3 A)		 20th to 100th
±(1.5 % of reading+0.8 A/0.4 A)		 20th to 100th
±(1.5 % of reading+1 A/0.5 A)		 20th to 100th
±(1.5 % of reading+0.8 A/0.4 A)
*1. The voltage display is set to RMS in AC/AC+DC mode and AVG in DC mode.
*2. AC mode: For an output voltage of 20 V to 200 V / 40 V to 400 V and 23 °C ± 5 °C. DC mode: For an output voltage of 28.5 V to 285 V / 57 V to 570 V and 23 °C ± 5 °C
*3. An output current in the range of 5 % to 100 % of the maximum current, and 23 °C ± 5 °C.
*4. An output current in the range of 5 % to 100 % of the maximum peak current in AC mode, an output current in the range of 5 % to 100 % of the maximum instantaneous current in DC mode, and 23 °C ± 5 °C. The accuracy of the peak value is for a waveform of DC or sine wave
*5. For an output voltage of 50 V or greater, an output current in the range of 10 % to 100 % of the maximum current, DC or an output frequency of 45 Hz to 65 Hz, and 23 °C ± 5 °C
*6. The apparent and reactive powers are not displayed in the DC mode.
*7. The reactive power is for the load with the power factor 0.5 or lower.
*8. An output voltage in the range of 20 V to 200 V / 40 V to 400 V and 23 °C ± 5 °C.
OTHERS
PROTECTIONS UVP, OCP, OTP, OPP, Fan Fail
DISPLAY TFT-LCD, 4.3 inch
MEMORY FUNCTION Store and recall settings, Basic settings: 10 (0 to 9 numeric keys)
ARBITRARY WAVE Number of Memories   253 (nonvolatile)
Waveform Length 4096 words
    USB Type A: Host, Type B: Slave, Speed: 2.0, USB-CDC
LAN MAC Address, DNS IP Address, User Password, Gateway IP Address, Instrument IP Address, Subnet Mask
 

 
INTERFACE Standard RS-232C Complies with the EIA-RS-232 specifications
EXT Control External Signal Input; External Control I/O
GPIB SCPI-1993, IEEE 488.2 compliant interface
INSULATION RESISTANCE
Between input and chassis, output and chassis, input and output		 1000 Vdc, 30 MΩ or more
WITHSTAND VOLTAGE
Between input and chassis, output and chassis, input and output		 1500 Vac, 1 minute
EMC EN 61326-1, EN 61326-2-1, EN 61000-3-2, EN 61000-3-3, EN 61000-3-11, EN 61000-3-12
EN 61000-4-2/-4-3/-4-4/-4-5/-4-6/-4-8/-4-11/-4-34, EN 55011 (Class A), EN 55032
SAFETY EN 61010-1
 
 
ENVIRONMENT		 Operating Environment Indoor use, Overvoltage Category II
Operating Temperature Range 0 °C to 40 °C
Storage Temperature Range -10 °C to 70 °C
Operating Humidity Range 20 % to 80 % RH (no condensation)
Storage Humidity Range 90 % RH or less (no condensation)
Altitude Up to 2000 m
TRANSPORTATION INTEGRITY ISTA 2A Test Procedure
DIMENSIONS & WEIGHT 430 mm(W) × 176 mm(H) × 530 mm(D) (not including protrusions); Approx. 25 kg
 
* Note: A value with the accuracy is the guaranteed value of the specification. However, an accuracy noted as reference value shows the supplemental data
for reference when the product is used, and is not under the guarantee. A value without the accuracy is the nominal value or representative value (shown as typ.).