產品介紹
產品應用
關於福斯
最新消息
詢問清單
聯絡我們
產品介紹
   首頁 | 產品介紹 | 固緯量測儀器 | 電源供應器 | 可程式單通道直流電源供應器 | 雙向直流電源供應器
固緯量測儀器
日本 NF儀器
巨孚環測設備
高壓直流電源供應器(國產)
雙儀量測儀器
馬達/線圈測試儀器
擎宏-電源設備
Cosmopia環測設備(日立)
美國HVM200 人體振動計
HIOKI溫度記錄器/超絕緣計
超高精度多通道電池模擬器
各類掌上型量測工具
高壓直流電源供應器(美國)
華儀安規測試儀器
Fluke 福祿克萬用電錶
艾普斯交直流电源供應器
泰琪環測設備
可調式自耦變壓器
YOKOGAWA溫度記錄器
安規認證基本知識介紹
防水試驗機
校正服務
IP防水等級詳細劃分
儀器/環測設備規格選擇
 
 
RBS系列
雙向直流電源供應器
RBS 系列雙向直流電源是一款多功能的可編程電源，具備電源(供電)與負載(吸收)之雙向功能。它專為新能源領域的功率轉換裝置和儲能元件測試而設計，廣泛應用於電動車、儲能系統等相關產品的研發和生產測試。RBS 系列支援能量回收功能，讓企業「從設備選型開始落實ESG」並納入ESG報告中的節能績效指標。
  說明



RBS 系列雙向直流電源是一款多功能的可編程電源，具備電源(供電)與負載(吸收)之雙向功能。它專為新能源領域的功率轉換裝置和儲能元件測試而設計，廣泛應用於電動車、儲能系統等相關產品的研發和生產測試。RBS 系列支援能量回收功能，讓企業「從設備選型開始落實ESG」並納入ESG報告中的節能績效指標。

 

RBS 系列雙向直流電源內建 SAS (EN50530、Sandia)、SAS2 及自訂模型，並支援靜態/動態 MPPT 測試及雲遮/雲移動等日照模擬的複雜狀況。

 

RBS 系列可以模擬實際應用中的電池特性，可以模擬電池的充、放電特性，協助進行其他各項測試。內置8種固定電池模型 + 1種可自定義電池模型（模型依據國內外發佈的相關論文以及試驗資料）：錳酸鋰 LMO、鈷酸鋰 LCO、磷酸鐵鋰(鋰鐵) LFO、三元鋰 NCM、鈦酸鋰 LTO、鉛酸電池 Pb、鎳氫電池 NiMH、鎳鎘電池 NiCd。

 

傳統直流電源在馬達驅動器測試時，需於輸出端串接二極體防止逆向電流灌入，並需額外配置電子負載以吸收馬達煞車或下坡運轉時的回灌能量。而 RBS 系列雙向直流電源供應器可作為直流電源輸出，亦可作為直流電子負載操作，具一機雙用，滿足馬達驅動器測試，節省體積空間及簡易配置，並可將回灌能量回饋至電網，實現節能效益。

 

RBS 系列產品定位於高效能電力測試解決方案，專為研發及製造過程中的電力設備測試設計。其市場定位集中於新能源應用，如光伏發電系統、電動車充電模組及電池測試等領域。該產品具有高精度雙向電源功能、能量回饋、快速響應等特性，滿足各種高功率密度和綠色節能需求，適用於實驗室測試、產品開發和品質保證等場景，為客戶提供高靈活性和可靠性的測試支持。

特點
  • 雙向電源，集電源和負載功能於一體
  • 電壓輸出範圍 : 100 V, 500 V, 750 V, 1000 V, 1500 V, 2250 V
  • 功率輸出範圍 : 高功率密度5 kW, 10 kW, 15 kW @ 3U高度
  • 最大輸出電流 : 510 A
  • 標配SAS功能、電池模擬功能、電池充放電功能、序列編程功能。
  • 簡易主從並聯，同型號可以並聯達 10 台，最高並聯功率可達 150 kW
  • 完善保護機制：包括OVP、OCP、OTP及輸入過欠壓保護。
  • 直觀式觸控面板人機操作介面
  • 標配專用 PC 控制軟體
  • 介面選擇：USB, RS-232/RS-485, LAN, CAN or GPIB

 
  產品規格
 
SPECIFICATIONS
Model RBS05K-100 RBS10K-100 RBS15K-100
Output Rating
Rated power ± 5000 W ± 10000 W ± 15000 W
Rated voltage (source) 0 V to 100 V
Operating voltage (sink) 5 V to 100 V
Rated current ± 170 A ± 340 A ± 510 A
Output Voltage
Maximum settable voltage 100 V
Setting accuracy 0.05 %+0.05 % FS
Setting resolution 0.1 V
Load regulation CV 0.05 % FS
Line regulation CV 0.015 % FS
Temperature coefficient CV 100 ppm
Remote sensing (compensation voltage) 5 V
 
 
 
Source only		 Transient response(*1) 2 ms
Ripple noise p-p(*2) 500 mV
rms(*3) 35 mV
Rise time(*4) Full load 60 ms
No load 15 ms
Fall time(*5) Full load 15 ms
No load 30 ms
Output Current
Settable maximum source current 170 A 340 A 510 A
Settable maximum sink current -170 A -340 A -510 A
Setting accuracy 0.4 %+0.4 % FS
Setting resolution 0.01 A
Load regulation CC 0.2 % FS
Line regulation CC 0.05 % FS
Ripple and noise(*6) rms(*3) 0.1 % FS
Temperature coefficient CC 200 ppm
Output Power
Settable maximum source power 5000 W 10000 W 15000 W
Settable maximum sink power -5000 W -10000 W -15000 W
Setting accuracy 0.5 %+0.5 % FS
Setting resolution 1 W
DC Output Resistor
Resistance range 0 Ω to 100 Ω
Setting accuracy(*7) ≤5 % Rmax(0 % to 10 % Rmax) ; ≤10 % Rmax(10 % to Rmax)
Setting resolution 0.01 Ω
Protective Functions
OVP Range 0 % FS to 110 % FS
Accuracy 0.1 %FS
OCP Range 0 % FS to 110 % FS
Accuracy 0.2 % FS
OTP √ √ √
Vsense reverse protection √ √ √
Input voltage protection (OVP, UVP) √ √ √
Display Accuracy
Voltage Accuracy 0.05 %+0.05 % FS
Resolution 0.1 V
Current Accuracy 0.4 %+0.4 % FS
Resolution 0.01 A
Power Accuracy 0.5 %+0.5 % FS
Resolution 0.001 kW
Interfaces Digital
All-in-One(USB,RS-232/RS-485,CAN,LAN)(*8) All-in-On / GPIB
GPIB(*8) All-in-On / GPIB
400 V Three-phase Three-wire Input
Nominal input rating 380 Vac to 460 Vac
Input voltage range 342 Vac to 510 Vac
Input frequency range 47 Hz to 63 Hz
Output Power 5000 W 10000 W 15000 W
Input current (MAX) at 342 Vac 9.2 A 18.4 A 27.6 A
Input power (MAX) 5.5 kVA 11 kVA 16.5 kVA
Power factor (TYP) 0.99
Leakage current 5 mA
Efficiency sink/source (up to) 93 %
General Specifications
 
 
Environmental conditions		 Operating temperature 0 °C to 40 °C
Operating humidity 20 % to 90 % RH
Storage temperature -10 °C to 70 °C
Storage humidity 20 % to 90 % RH
Altitude 1000 m
Withstand voltage AC input to case (PE) DC 2300 V
Insulation resistance Between output and GND DC 500 V
Mechanical construction Dimensions (W x H x D) mm 482 mm × 133.3 mm × 790 mm
Weight 24 kg 32 kg 40 kg
Parallel operation √ √ √
 
*1. When the load changes from 50 % to 100 %, or from 100 % to 50 %, the voltage returns to within 0.75 % of the rating.
*2. Measurement frequency bandwidth is 20 Hz to 20 MHz.
*3. Measurement frequency bandwidth is 20 Hz to 2 MHz.
*4. First set the 0 V output, from 10 % to 90 % of the rated output voltage, with pure resistance.
*5. Rated voltage output, then set to 0 V,from 90 % to 10 % of rated output voltage, with pure resistance.
*6. The ripple is measured at 20 % to 100 % output voltage and full output current. Source mode is 0.1 % FS,Sink and Load mode is 0.2 % FS.
*7. When the input voltage is within 10 % to 100 % of the RBS voltage range and the load current is within 10 % to 100 % of the RBS current range.
*8. Communication interface: one of two, factory-installed.

 
SPECIFICATIONS
Model RBS05K-500 RBS10K-500 RBS15K-500
Output Rating
Rated power ± 5000 W ± 10000 W ± 15000 W
Rated voltage (source) 0 V to 500 V
Operating voltage (sink) 10 V to 500 V
Rated current ± 40 A ± 80 A ± 120 A
Output Voltage
Maximum settable voltage 500 V 500 V 500 V
Setting accuracy 0.05 %+0.05 % FS
Setting resolution 0.1 V
Load regulation CV 0.03 % FS
Line regulation CV 0.015 % FS
Temperature coefficient CV 100 ppm
Remote sensing (compensation voltage) 25 V
 
 
 
Source only		 Transient response(*1) 2 ms
Ripple noise p-p(*2) 600 mV
rms(*3) 95 mV
Rise time(*4) Full load 30 ms
No load 15 ms
Fall time(*5) Full load 15 ms
No load 30 ms
Output Current
Settable maximum source current 40 A 80 A 120 A
Settable maximum sink current -40 A -80 A -120 A
Setting accuracy 0.15 %+0.15 % FS
Setting resolution 0.01 A
Load regulation CC 0.1 % FS
Line regulation CC 0.05 % FS
Ripple and noise(*6) rms(*3) 0.1 % FS
Temperature coefficient CC 200 ppm
Output Power
Settable maximum source power 5000 W 10000 W 15000 W
Settable maximum sink power -5000 W -10000 W -15000 W
Setting accuracy 0.5 %+0.5 % FS
Setting resolution 1 W
DC Output Resistor
Resistance range 0 Ω to 500 Ω
Setting accuracy(*7) ≤5 % Rmax(0 % to 10 % Rmax) ; ≤10 % Rmax(10 % to Rmax)
Setting resolution 0.01 Ω
Protective Functions
OVP Range 0 % FS to 110 % FS
Accuracy 0.1 %FS
OCP Range 0 % FS to 110 % FS
Accuracy 0.2 % FS
OTP √ √ √
Vsense reverse protection √ √ √
Input voltage protection (OVP, UVP) √ √ √
Display Accuracy
Voltage Accuracy 0.05 %+0.05 % FS
Resolution 0.1 V
Current Accuracy 0.15 %+0.15 % FS
Resolution 0.01 A
Power Accuracy 0.5 %+0.5 % FS
Resolution 0.001 kW
Interfaces Digital
All-in-One(USB,RS-232/RS-485,CAN,LAN)(*8) All-in-On / GPIB
GPIB(*8) All-in-On / GPIB
400 V Three-phase Three-wire Input
Nominal input rating 380 Vac to 460 Vac
Input voltage range 342 Vac to 510 Vac
Input frequency range 47 Hz to 63 Hz
Output Power 5000 W 10000 W 15000 W
Input current (MAX) at 342 Vac 9.2 A 18.4 A 27.6 A
Input power (MAX) 5.5 kVA 11 kVA 16.5 kVA
Power factor (TYP) 0.99
Leakage current 5 mA
Efficiency sink/source (up to) 93 %
General Specifications
 
 
Environmental conditions		 Operating temperature 0 °C to 40 °C
Operating humidity 20 % to 90 % RH
Storage temperature -10 °C to 70 °C
Storage humidity 20 % to 90 % RH
Altitude 1000 m
Withstand voltage AC input to case (PE) DC 2300 V
Insulation resistance Between output and GND DC 500 V
Mechanical construction Dimensions (W x H x D) mm 482 mm × 133.3 mm × 790 mm
Weight 24 kg 32 kg 40 kg
Parallel operation √ √ √
 
*1. When the load changes from 50 % to 100 %, or from 100 % to 50 %, the voltage returns to within 0.75 % of the rating.
*2. Measurement frequency bandwidth is 20 Hz to 20 MHz.
*3. Measurement frequency bandwidth is 20 Hz to 2 MHz.
*4. First set the 0 V output, from 10 % to 90 % of the rated output voltage, with pure resistance.
*5. Rated voltage output, then set to 0 V, from 90 % to 10 % of rated output voltage, with pure resistance.
*6. The ripple is measured at 20 % to 100 % output voltage and full output current. Source mode is 0.1 % FS,Sink and Load mode is 0.2 % FS.
*7. When the input voltage is within 10 % to 100 % of the RBS voltage range and the load current is within 10 % to 100 % of the RBS current range.
*8. Communication interface: one of two, factory-installed.

 
SPECIFICATIONS
Model RBS05K-750 RBS10K-750 RBS15K-750
Output Rating
Rated power ± 5000 W ± 10000 W ± 15000 W
Rated voltage (source) 0 V to 750 V
Operating voltage (sink) 10 V to 750 V
Rated current ± 25 A ± 50 A ± 75 A
Output Voltage
Maximum settable voltage 750 V
Setting accuracy 0.05 %+0.05 % FS
Setting resolution 0.1 V
Load regulation CV 0.03 % FS
Line regulation CV 0.015 % FS
Temperature coefficient CV 100 ppm
Remote sensing (compensation voltage) 37.5 V
 
 
 
Source only		 Transient response(*1) 2 ms
Ripple noise p-p(*2) 900 mV
rms(*3) 100 mV
Rise time(*4) Full load 30 ms
No load 15 ms
Fall time(*5) Full load 15 ms
No load 30 ms
Output Current
Settable maximum source current 25 A 50 A 75 A
Settable maximum sink current -25 A -50 A -75 A
Setting accuracy 0.15 %+0.15 % FS
Setting resolution 0.01 A
Load regulation CC 0.1 % FS
Line regulation CC 0.05 % FS
Ripple and noise(*6) rms(*3) 0.1 % FS
Temperature coefficient CC 200 ppm
Output Power
Settable maximum source power 5000 W 10000 W 15000 W
Settable maximum sink power -5000 W -10000 W -15000 W
Setting accuracy 0.5 %+0.5 % FS
Setting resolution 1 W
DC Output Resistor
Resistance range 0 Ω to 750 Ω
Setting accuracy(*7) ≤5 % Rmax(0 % to 10 % Rmax) ; ≤10 % Rmax(10 % to Rmax)
Setting resolution 0.01 Ω
Protective Functions
OVP Range 0 % FS to 110 % FS
Accuracy 0.1 %FS
OCP Range 0 % FS to 110 % FS
Accuracy 0.2 % FS
OTP √ √ √
Vsense reverse protection √ √ √
Input voltage protection (OVP, UVP) √ √ √
Display Accuracy
Voltage Accuracy 0.05 %+0.05 % FS
Resolution 0.1 V
Current Accuracy 0.15 %+0.15 % FS
Resolution 0.01 A
Power Accuracy 0.5 %+0.5 % FS
Resolution 0.001 kW
Interfaces Digital
All-in-One(USB,RS-232/RS-485,CAN,LAN)(*8) All-in-On / GPIB
GPIB(*8) All-in-On / GPIB
400 V Three-phase Three-wire Input
Nominal input rating 380 Vac to 460 Vac
Input voltage range 342 Vac to 510 Vac
Input frequency range 47 Hz to 63 Hz
Output Power 5000 W 10000W 15000W
Input current (MAX) at 342 Vac 9.2 A 18.4A 27.6A
Input power (MAX) 5.5 kVA 11 kVA 16.5 kVA
Power factor (TYP) 0.99
Leakage current 5 mA
Efficiency sink/source (up to) 93 %
General Specifications
 
 
Environmental conditions		 Operating temperature 0 °C to 40 °C
Operating humidity 20 % to 90 % RH
Storage temperature -10 °C to 70 °C
Storage humidity 20 % to 90 % RH
Altitude 1000 m
Withstand voltage AC input to case (PE) DC 2300 V
Insulation resistance Between output and GND DC 500 V
Mechanical construction Dimensions (W x H x D) mm 482 mm × 133.3 mm × 790 mm
Weight 24 kg 32 kg 40 kg
Parallel operation √ √ √
 
*1. When the load changes from 50 % to 100 %, or from 100 % to 50 %, the voltage returns to within 0.75 % of the rating.
*2. Measurement frequency bandwidth is 20 Hz to 20 MHz.
*3. Measurement frequency bandwidth is 20 Hz to 2 MHz.
*4. First set the 0 V output,from 10 % to 90 % of the rated output voltage,with pure resistance.
*5. Rated voltage output, then set to 0 V,from 90 % to 10 % of rated output voltage,with pure resistance.
*6. The ripple is measured at 20 % to 100 % output voltage and full output current.Source mode is 0.1 % FS,Sink and Load mode is 0.2 % FS.
*7. When the input voltage is within 10 % to 100 % of the RBS voltage range and the load current is within 10 % to 100 % of the RBS current range.
*8. Communication interface: one of two, factory-installed.

SPECIFICATIONS
Model RBS10K-1000 RBS15K-1500 RBS15K-2250
Output Rating
Rated power ± 10000 W ± 15000 W ± 15000 W
Rated voltage (source) 0 V to 1000 V 0 V to 1500 V 0 V to 2250 V
Operating voltage (sink) 10 V to 1000 V 10 V to 1500 V 10 V to 2250 V
Rated current ± 40 A ± 40 A ± 25 A
Output Voltage
Maximum settable voltage 1000 V 1500 V 2250 V
Setting accuracy 0.05 %+0.05 % FS
Setting resolution 0.1 V
Load regulation CV 0.03 % FS
Line regulation CV 0.015 % FS
Temperature coefficient CV 100 ppm
Remote sensing (compensation voltage) 50 V 75 V 112.5 V
 
 
 
Source only		 Transient response(*1) 2 ms
Ripple noise p-p(*2) 1700 mV 2000 mV 6000 mV
rms(*3) 295 mV 300 mV 400 mV
Rise time(*4) Full load 30 ms
No load 15 ms
Fall time(*5) Full load 15 ms
No load 30 ms
Output Current
Settable maximum source current 40 A 40 A 25 A
Settable maximum sink current -40 A -40 A -25 A
Setting accuracy 0.15 %+0.15 % FS 0.15 %+0.15 % FS 0.2 %+0.2 % FS
Setting resolution 0.01 A
Load regulation CC 0.1 % FS
Line regulation CC 0.05 % FS
Ripple and noise(*6) rms(*3) 0.1 % FS
Temperature coefficient CC 200 ppm
Output Power
Settable maximum source power 10000 W 15000 W 15000 W
Settable maximum sink power -10000 W -15000 W -15000 W
Setting accuracy 0.5 %+0.5 % FS 0.5 %+0.5 % FS 1 %+1 % FS
Setting resolution 1 W
DC Output Resistor
Resistance range 0 Ω to 1000 Ω 0 Ω to 1500 Ω 0 Ω to 2250 Ω
Setting accuracy(*7) ≤5 % Rmax(0 % to 10 % Rmax) ; ≤10 % Rmax(10 % to Rmax)
Setting resolution 0.01 Ω
Protective Functions
OVP Range 0 % FS to 110 % FS
Accuracy 0.1 %FS
OCP Range 0 % FS to 110 % FS
Accuracy 0.2 % FS
OTP √ √ √
Vsense reverse protection √ √ √
Input voltage protection (OVP, UVP) √ √ √
Display Accuracy
Voltage Accuracy 0.05 %+0.05 % FS
Resolution 0.1 V
Current Accuracy 0.15 %+0.15 % FS 0.15 %+0.15 % FS 0.2 %+0.2 % FS
Resolution 0.01 A
Power Accuracy 0.5 %+0.5 % FS 0.5 %+0.5 % FS 1 %+1 % FS
Resolution 0.001 kW
Interfaces Digital
All-in-One(USB,RS-232/RS-485,CAN,LAN)(*8) All-in-On / GPIB
GPIB(*8) All-in-On / GPIB
400 V Three-phase Three-wire Input
Nominal input rating 380 Vac to 460 Vac
Input voltage range 342 Vac to 510 Vac
Input frequency range 47 Hz to 63 Hz
Output Power 10000 W 15000 W 15000 W
Input current (MAX) at 342 Vac 18.4 A 27.6 A 27.6 A
Input power (MAX) 11 kVA 16.5 kVA 16.5 kVA
Power factor (TYP) 0.99
Leakage current 5 mA
Efficiency sink/source (up to) 93 %
General Specifications
 
 
Environmental conditions		 Operating temperature 0 °C to 40 °C
Operating humidity 20 % to 90 % RH
Storage temperature -10 °C to 70 °C
Storage humidity 20 % to 90 % RH
Altitude 1000 m
Withstand voltage AC input to case (PE) DC 2300 V
Insulation resistance Between output and GND DC 500 V
Mechanical construction Dimensions (W x H x D) mm 482 mm × 133.3 mm × 790 mm
Weight 32 kg 40 kg 40 kg
Parallel operation √ √ √
 
*1. When the load changes from 50 % to 100 %, or from 100 % to 50 %, the voltage returns to within 0.75 % of the rating.
*2. Measurement frequency bandwidth is 20 Hz to 20 MHz.
*3. Measurement frequency bandwidth is 20 Hz to 2 MHz.
*4. First set the 0 V output, from 10 % to 90 % of the rated output voltage, with pure resistance.
*5. Rated voltage output, then set to 0 V, from 90 % to 10 % of rated output voltage, with pure resistance.
*6. The ripple is measured at 20 % to 100 % output voltage and full output current. Source mode is 0.1 % FS, Sink and Load mode is 0.2 % FS.
*7. When the input voltage is within 10 % to 100 % of the RBS voltage range and the load current is within 10 % to 100 % of the RBS current range.
*8. Communication interface: one of two, factory-installed.