產品介紹
產品應用
關於福斯
最新消息
詢問清單
聯絡我們
產品介紹
   首頁 | 產品介紹 | 固緯量測儀器 | 電源供應器 | 可程式多通道直流電源供應器 | 三通道可編程直流電源供應器
固緯量測儀器
日本 NF儀器
巨孚環測設備
高壓直流電源供應器(國產)
雙儀量測儀器
馬達/線圈測試儀器
擎宏-電源設備
Cosmopia環測設備(日立)
美國HVM200 人體振動計
HIOKI溫度記錄器/超絕緣計
超高精度多通道電池模擬器
各類掌上型量測工具
高壓直流電源供應器(美國)
華儀安規測試儀器
Fluke 福祿克萬用電錶
艾普斯交直流电源供應器
泰琪環測設備
可調式自耦變壓器
YOKOGAWA溫度記錄器
安規認證基本知識介紹
防水試驗機
校正服務
IP防水等級詳細劃分
儀器/環測設備規格選擇
 
 
GPP-3060/6030/3650
三通道可編程直流電源供應器

既是可程式電源供應器又是電子負載

GPP-3060/6030/3650 三通道可程式直流電源供應器，為GPP-X323系列的延伸機種，這兩個機種的最大輸出功率為385 W。

  • GPP-3060支援 CH1/CH2: 0 V to 30 V / 0 A to 6 A輸出
  • GPP-6030支援 CH1/CH2: 0 V to 60 V / 0 A to 3 A輸出
  • GPP-3650支援 CH1/CH2: 0 V to 36 V / 0 A to 5 A輸出
  說明



充放自如、一舉兩得

 

既是可程式電源供應器又是電子負載

 

GPP-3060/6030/3650 三通道可程式直流電源供應器，為GPP-X323系列的延伸機種，這兩個機種的最大輸出功率為385 W。

 

  • GPP-3060支援 CH1/CH2: 0 V to 30 V / 0 A to 6 A輸出
  • GPP-6030支援 CH1/CH2: 0 V to 60 V / 0 A to 3 A輸出
  • GPP-3650支援 CH1/CH2: 0 V to 36 V / 0 A to 5 A輸出

 

三個機種的CH3都是支援1.8 V, 2.5 V, 3.3 V, 5.0 V/5 A。

 

GPP-3060/6030/3650承襲GPP系列的高設定解析度(1 mV/0.1 mA)及顯示解析度(0.1 mV/0.1 mA)，在低漣波雜訊特性為 ≦1 mVrms/≦2 mArms及 ≦100 µs輸出瞬態回復能力，並且提供各通道獨立輸出開關。

 

GPP系列特有的負載功能，可在CH1/CH2任意設定為電源或負載（Load）功能。

例如一個通道為電源輸出，另一個通道設定為負載功能消耗待測物功率，滿足單台電源進行簡單基本電池充放電或負載特性測試；

 

序列式輸出功能(Sequence)，可以讓使用者自行編輯電源輸出波形，也可以讓使用者設定序列式的定電壓(CV)或定電流(CC)拉載波形。

例如序列式電源輸出或者動態負載的模擬測試；通道3(CH3)增加3A USB(Type A)輸出端子，可以做USB充電測試。

 

適合應用領域

  • 科學研究與實驗測試
  • 電池充放電測試
  • 電子零件量測
  • 3C電子產品量測
特點
  • 4.3”TFT LCD螢幕
  • 設定解析度: 1 mV/ 0.1 mA; 顯示解析度: 0.1 mV/ 0.1 mA
  • 低漣波雜訊: ≦1 mVrms/ ≦2 mArms
  • 瞬態回復時間: ≦100 µs
  • 具有負載（Load）功能(CC, CV, CR mode)
  • Tracking 串並聯功能，無需額外的外部配線
  • 採用硬體實現過電壓保護/過電流保護/過溫度保護
  • 延遲功能/輸出監測功能/輸出記錄器功能
  • 支援設定值、量測值及輸出波形顯示
  • 序列式輸出功能(Sequence)及內建8種模板波形
  • 輸出記錄器功能(Recorder )記錄輸出的電壓&電流參數，記錄間隔最短為1秒
  • 針對Sequence/Delay/Recorder/面板之設置條件，提供各別十組存儲空間(memory)
  • 支援USB(Type A) 輸出端子
  • 智能溫控風扇有效降低噪音
  • 標配RS-232、USB、Ext I/O
  • 選配(工廠安裝) : LAN或LAN+GPIB
 
  產品規格
    GPP-3060 GPP-6030 GPP-3650
Output Mode
Number of Channel CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3
Voltage 0 ~ 30.000V 0 ~ 30.000V 1.8V/2.5V/3.3V/5.0V, ±5% 0 ~ 60.000V 0 ~ 60.000V 1.8V/2.5V/3.3V/5.0V, ±5% 0 ~ 36.000V 0 ~ 36.000V 1.8V/2.5V/3.3V/5.0V, ±5%
Current 0 ~ 6.0000A 0 ~ 6.0000A 5A (USB Port 3A) 0 ~ 3.0000A 0 ~ 3.0000A 5A (USB Port 3A) 0 ~ 5.0000A 0 ~ 5.0000A 5A (USB Port 3A)
Tracking Series Voltage / Current 0 ~ 60.000V / 0 ~ 6.0000A - 0 ~ 120.000V / 0 ~ 3.0000A - 0 ~ 72.000V / 0 ~ 5.0000A -
Tracking Parallel Voltage / Current 0 ~ 30.000V / 0 ~ 12.0000A - 0 ~ 60.000V / 0 ~ 6.0000A - 0 ~ 36.000V / 0 ~ 10.0000A -
Warning The CH3 output current from the 2 terminals should Not exceed 5A.
Constant Voltage Operation
Line Regulation ≤0.01% + 3mV ≤3mV ≤0.01% + 3mV ≤3mV ≤0.01% + 3mV ≤3mV
Load regulation ≤0.01% + 5mV (rating current ≤10A) ≤5mV ≤0.01% + 5mV (rating current ≤10A) ≤5mV ≤0.01% + 5mV (rating current ≤10A) ≤5mV
Ripple & noise (5Hz-1MHz) ≤1mVrms ≤2mVrms ≤1mVrms ≤2mVrms ≤1mVrms ≤2mVrms
Transient recovery time ≤100µs
(50% load change，minimum load 0.5A)
Temperature coefficient ≤300ppm/°C
Constant Current Operation
Line Regulation ≤0.01% + 3mA
Load regulation ≤0.01% + 3mA
Ripple & noise ≤2mArms
Resolution
Programming Voltage 1mV  
-		 2mV  
-		 2mV  
-
Current 0.2mA 0.1mA 0.1mA
Reedback Voltage 0.1mV 0.1mV 0.1mV
Current 0.1mA 0.1mA 0.1mA
Tracking Operation(CH1/CH2)
 
Tracking error		 ≤0.1% +10mV of Master  
 
 
 
-		 ≤0.2% +20mV of Master  
 
 
 
-		 ≤0.1% +10mV of Master  
 
 
 
-
(No Load, with load add load regulation ≤
200mV)		 (No Load, with load add load regulation ≤
200mV)		 (No Load, with load add load regulation ≤
200mV)
 
Parallel regulation		 Line ≤0.01% + 3mV ≤0.01% + 3mV ≤0.01% + 3mV
Load ≤0.01% + 5mV (rating current ≤10A) ≤0.01% + 5mV (rating current ≤10A) ≤0.01% + 5mV (rating current ≤10A)
≤0.02% + 5mV (rating current > 10A) ≤0.02% + 5mV (rating current > 10A) ≤0.02% + 5mV (rating current > 10A)
Series regulation Line ≤0.01% + 5mV ≤0.01% + 5mV ≤0.01% + 5mV
Load ≤200mV ≤200mV ≤200mV
Ripple & noise ≤2mVrms(5Hz-1MHz) ≤2mVrms(5Hz-1MHz) ≤2mVrms(5Hz-1MHz)
Note Tracking is not supported in LOAD mode.
Meter
Full Scale Voltage 32.0000V 1.8V/2.5V/3.3V/5.0V 62.0000V 1.8V/2.5V/3.3V/5.0V 36.0000V 1.8V/2.5V/3.3V/5.0V
Current 6.2000A  
 
 
 
-		 3.2000A  
 
 
 
-		 5.2000A  
 
 
 
-
Programming
Resolution		 Voltage 5 digits 5 digits 5 digits
Current 5 digits 5 digits 5 digits
Reedback Resolution Voltage 6 digits 6 digits 6 digits
Current 5 digits 5 digits 5 digits
Setting accuracy Voltage ± (0.03% of reading + 10mV) ± (0.03% of reading + 10mV) ± (0.03% of reading + 10mV)
Current ± (0.3% of reading + 10mA) ± (0.3% of reading + 10mA) ± (0.3% of reading + 10mA)
Readback accuracy Voltage ± (0.03% of reading + 10mV) ± (0.03% of reading + 10mV) ± (0.03% of reading + 10mV)
Current ± (0.3% of reading + 10mA) ± (0.3% of reading + 10mA) ± (0.3% of reading + 10mA)
DC Load Mode
 
Display		 Voltage 1 ~ 32.00V   1 ~ 62.00V   1 ~ 36.5.00V  
Current 0 ~ 6.200A 0 ~ 3.200A 0 ~ 5.200A
Power 0 ~ 50.00W 0 ~ 50.00W 0 ~ 50.00W
 
CV Mode		 CH1/CH2 1.500V - 32.00V 1.500V - 62.00V 1.500V - 36.50V
Setting Accuracy ≤±(0.1% + 30mV) ≤±(0.1% + 30mV) ≤±(0.1% + 30mV)
Reedback Accuracy ≤±(0.1% + 30mV) ≤±(0.1% + 30mV) ≤±(0.1% + 30mV)
Resoltion 10mV 10mV 10mV
 

    GPP-3060 GPP-6030 GPP-3650
 
CC Mode		 CH1/CH2 0 ~ 6.200A  
-		 0 ~ 3.200A  
-		 0 ~ 5.200A  
-
Setting Accuracy ≤±(0.3% + 10mA) ≤±(0.3% + 10mA) ≤±(0.3% + 10mA)
Reedback Accuracy ≤±(0.3% + 10mA) ≤±(0.3% + 10mA) ≤±(0.3% + 10mA)
Resoltion 1mA 1mA 1mA
 
 
 
CR Mode		 CH1/CH2 1Ω- 1kΩ 1Ω- 1kΩ 1Ω- 1kΩ
Setting Accuracy ≤±(3% + 1Ω) ≤±(3% + 1Ω) ≤±(3% + 1Ω)
(voltage≥0.1V, and current≥0.1A) (voltage≥0.1V, and current≥0.1A) (voltage≥0.1V, and current≥0.1A)
Reedback Accuracy ≤±(3% + 1Ω) ≤±(3% + 1Ω) ≤±(3% + 1Ω)
(voltage≥0.1V, and current≥0.1A) (voltage≥0.1V, and current≥0.1A) (voltage≥0.1V, and current≥0.1A)
Resoltion 1Ω 1Ω 1Ω
Protection
 
OVP		 Power Mode OFF,ON(0.5V-35.0V) Fixed 5.5V OFF,ON(0.5V-65.0V) Fixed 5.5V OFF,ON(0.5V-38.0V) Fixed 5.5V
Load Mode OFF,ON(1.5V-35.0V) - OFF,ON(1.5V-65.0V) - OFF,ON(1.5V-38.0V) -
Setting Accuracy ±100mV
Resoltion 100mV
 
OCP		 Power Mode OFF,ON(0.05A-6.50A) 3.1A(USB port) OFF,ON(0.05A-3.50A) 3.1A(USB port) OFF,ON(0.05A-5.50A) 3.1A(USB port)
Load Mode OFF,ON(0.05A-6.50A) - OFF,ON(0.05A-3.50A) - OFF,ON(0.05A-5.50A) -
Setting Accuracy ±20mA
Resoltion 10mA
 
Insulation resistance		 Between chassis and terminal 20MΩ or above (DC 500V)
Between chassis and DC power cord 30MΩ or above (DC 500V)
General
 
Operation Environment		 Indoor use, Altitude: ≤2000m
Ambient temperature: 0 ~ 40°C
Relative humidity: ≤80%
Installation category: II / Pollution degree: 2
Storage Environment TEMPERATURE: -10°C ~ 70 °C
HUMIDITY: ≤70%
Power Input AC 100V/120V/220V/230V±10%, 50/60Hz
Power Consumption 900VA, 680W
 
Accessories		 CD User manual x1, Quick Start manual x1, Power Code x1
Test lead: GTL-104A x 3
(Europe) Test lead: GTL-204A x 3, GTL-201A x1
Dimensions 213 (W) x 145 (H) x 362 (D) mm
Weight Approx. 10kg