|
|
|
|
|
|
 |
MDO-2000A是MDO-2000E的高級版本。可選頻寬範圍升級到300MHz。
全機種頻寬範圍包括300MHz，200MHz和100MHz。取樣率已升級到最大2GSa / s，儲存深度也已升級到20M /每通道，因此，示波器的三個主要規格得到了相當程度的改進。
該系列的新型號具有2個通道，包括MDO-2000A和MDO-2000AG。整個系列提供示波器和頻譜分析儀的功能。最重要的是，MDO-2000AG具有一個雙通道25MHz任意波訊號產生器。
新一代MDO-2000A系列為用戶提供了更好的取樣率和儲存深度，從而獲得更真實的信號完整性，並且更高的頻寬選擇可以滿足更高頻率的測量要求。
|
|
|
|
|
|
 說明 |
 |
多功能混合示波器MDO-2000A系列
特點
-
300/200/100MHz頻寬機種選擇
-
類比通道數量:2通道
-
及時取樣率: 2GSa/s最大.
-
記憶體深度，每通道20M
-
波形更新率:120,000 wfms/s
-
VPO顯示技術
-
8 “ WVGA TFT LCD顯示
-
FFT最大1M點
-
高通/低通/帶通濾波器
-
29,000分段記憶體以及波形搜尋功能
-
I2C/UART/CAN/LIN觸發以及解碼
MDO-2000A是MDO-2000E的高級版本。可選頻寬範圍升級到300MHz。
全機種頻寬範圍包括300MHz，200MHz和100MHz。取樣率已升級到最大2GSa / s，儲存深度也已升級到20M /每通道，因此，示波器的三個主要規格得到了相當程度的改進。
該系列的新型號具有2個通道，包括MDO-2000A和MDO-2000AG。整個系列提供示波器和頻譜分析儀的功能。最重要的是，MDO-2000AG具有一個雙通道25MHz任意波訊號產生器。
新一代MDO-2000A系列為用戶提供了更好的取樣率和儲存深度，從而獲得更真實的信號完整性，並且更高的頻寬選擇可以滿足更高頻率的測量要求。
|
|
| 產品規格 |
|
MDO‐2000A Series
|
|
Channels |
Bandwidth (‐3dB) |
Calculated Rise Time |
Bandwidth Limit (‐3dB) |
|
MDO‐2102A |
2ch+Ext |
DC~100MHz |
3.5ns |
20MHz |
|
MDO‐2102AG |
2ch+Ext |
DC~100MHz |
3.5ns |
20MHz |
|
MDO‐2202A |
2ch+Ext |
DC~200MHz |
1.75ns |
20M/100MHz |
|
MDO‐2202AG |
2ch+Ext |
DC~200MHz |
1.75ns |
20M/100MHz |
|
MDO‐2302A |
2ch+Ext |
DC~300MHz |
1.17ns |
20M/100/200MHz |
|
MDO‐2302AG |
2ch+Ext |
DC~300MHz |
1.17ns |
20M/100/200MHz |
*MDO‐2000AG provides dual channel 25MHz AWG
|
MDO‐2000A series Specifications |
|
|
MDO‐2102A/AG |
MDO‐2202A/AG |
MDO‐2302A/AG |
|
Channels |
2CH+ EXT. |
|
Bandwidth(‐3dB) |
DC~100MHz |
DC~200MHz |
DC~300MHz |
|
Rise time |
3.5ns |
1.75ns |
1.17ns |
|
Bandwidth Limit |
20MHz |
20M/100MHz |
20M/100M/200MHz |
|
Vertical Sensitivity |
Resolution |
8 bit |
|
1mV~10V/div |
|
Input Coupling |
AC, DC, GND |
|
Input Impedance |
1MΩ// 16pF approx. |
DC Gain Accuracy |
±(3%)when 2mV/div or greater is selected |
|
±(5%)when 1mV/div is selected; |
|
Polarity |
Normal & Invert |
Maximum Input
Voltage |
300Vrms, CAT I |
Offset Position Range |
1mV/div ~ 20mV/div : ±0.5V |
|
50mV/div ~ 200mV/div : ±5V |
|
500mV/div ~ 2V/div : ±25V |
|
5V~10V/div : ±250V |
Waveform Signal
Process |
+, ‐, ×, ÷, FFT, User Defined Expression. |
|
|
FFT: 1Mpts
FFT: Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to
Rectangular, Hamming, Hanning, or Blackman. |
|
Trigger |
|
Source |
CH1 ,CH2 Line, EXT |
|
Trigger Mode |
Auto (supports Roll Mode for 100ms/div or slower), Normal, Single Sequence |
|
Trigger Type |
Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate, Time out, Event‐Delay(1~65535 events), Time‐Delay(Duration,4nS~10S), Bus |
|
Holdoff range |
4ns~10s |
|
Coupling |
AC, DC, LF rej., HF rej. , Noise rej. |
|
Sensitivity |
1div |
|
External Trigger |
|
Range |
±15V |
Sensitivity |
DC ~ 100MHz Approx.100mV |
|
100MHz ~ 200MHz Approx. 150mV |
|
200MHz ~ 300MHz Approx. 150mV |
|
Input Impedance |
1MΩ±3%~16pF |
|
Horizontal |
Time base Range |
1ns/div ~ 100s/div (1‐2‐5 increments) |
|
ROLL: 100ms/div ~ 100s/div |
|
Pre‐trigger |
10 div maximum |
|
Post‐trigger |
2,000,000 div maximum. |
|
Time base Accuracy |
±50 ppm over any ≥ 1ms time interval |
Real Time Sample
Rate |
Max.:2GSa/s |
|
Record Length |
Per Channel 20M pts |
|
Acquisition Mode |
Normal, Average, Peak Detect, Single |
|
Peak Detection |
2ns (typical) |
|
Average |
selectable from 2 to 256 |
|
X‐Y Mode |
|
X‐Axis Input |
Channel 1 |
|
Y‐Axis Input |
Channel 2 |
|
Phase Shift |
±3° at 100kHz |
|
Cursors and Measurement |
|
Cursors |
Amplitude, Time, Gating available unit: Seconds(s), Hz(1/s) ,Phase(degree) ,Ration(%) |
Automatic Measurement |
38 sets: Pk‐Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime,
+Width, ‐Width, Duty Cycle, +Pulses, ‐Pulses, +Edges, ‐Edges, %Flicker ,Flicker Idx,FRR, FRF, FFR,
FFF, LRR, LRF, LFR, LFF, Phase |
|
Control Panel Function |
|
Auto counter |
6 digits, range from 2Hz minimum to the rated bandwidth |
|
Autoset |
Single‐button, automatic setup of all channels for vertical, horizontal and trigger systems, with
undo Autoset |
|
Save Setup |
20 sets |
|
Save Waveform |
24 sets |
|
Display |
|
TFT LCD Type |
8" TFT LCD WVGA color display |
|
Display Resolution |
800 horizontal × 480 vertical pixels (WVGA) |
|
Interpolation |
Sin(x)/x |
|
Waveform Display |
Dots, vectors, variable persistence (16ms~4s), infinite persistence |
Waveform Update
Rate |
120,000 waveforms per second, maximum |
|
Display Graticule |
8 x 10 divisions |
|
Display mode |
YT ;XY |
|
Interface |
|
USB Port |
USB 2.0 High‐speed host port X1, USB 2.0 High‐speed device port X1 |
|
Ethernet(LAN) Port |
RJ‐45 connector, 10/100Mbps with HP Auto‐MDIX |
|
Go‐NoGo BNC |
5V Max/10mA TTL open collector output |
Kensington Style
Lock |
Rear‐panel security slot connects to standard Kensington‐style lock. |
|
Spectrum Analyzer Specifications |
|
Frequency range |
DC~1GHz (Max. ,Max.bandwidth~1GHz uncalibrated) |
|
Span |
1kHz~1GHz(Max.) |
Resolution bandwidth |
1Hz ~ 1MHz(Max.) |
|
Reference level |
‐50 dBm to +40dBm in steps of 5dBm |
|
Vertical units |
dBV RMS; Linear RMS; dBm |
|
Vertical position |
‐12divs to +12divs |
|
Vertical scale |
1dB/div to 20dB/div in a 1‐2‐5 Sequence |
|
Display average noise level |
1V/div < ‐50dBm, Avg : 16 100mV/div < ‐70dBm, Avg : 16
10mV/div < ‐90dBm, Avg : 16 |
|
Spurious response |
2nd harmonic distortion< 40dBc
3rd harmonic distortion< 45dBc |
Frequency domain
trace types |
Normal ; Max Hold ; Min Hold ; Average (2 ~ 256) |
|
Detection methods |
Sample ; +Peak ; ‐Peak ; Average |
|
FFT Windows |
FFT Factor : |
|
Hanning 1.44 |
|
Rectangular 0.89 |
|
Hamming 1.30 |
|
Blackman 1.68 |
|
AWG Specifications (MDO‐2000AG only) |
|
Channels |
2 |
|
Sample Rate |
200 MSa/s |
|
Vertical Resolution |
14 bits |
|
Max. Frequency |
25 MHz |
|
Waveforms |
Sine, Square, Pulse, Ramp, DC, Noise, Sinc, Gaussian, Lorentz, Exponential Rise, Exponential
Fall, Haversine, Cardiac |
|
Output Range |
20 mVpp to 5 Vpp, HighZ;10 mVpp to 2.5 Vpp, 50 Ω |
|
Output Resolution |
1mV |
|
Output Accuracy |
2% (1 kHz) |
|
Offset Range |
±2.5 V(DC+AC), HighZ; ±1.25 V(DC+AC), 50 Ω |
|
Offset Resolution |
1mV |
|
Sine |
|
Frequency Range |
100mHz to 25MHz |
|
Flatness |
±0.5 dB<15MHz; ±1 dB:15MHz~25MHz |
|
(relative to 1kHz) |
|
Harmonic
Distortion |
‐40 dBc |
Stray
(Non‐harmonic) |
‐40 dBc |
Total Harmonic
Distortion |
1% |
|
S/N Ratio |
40 dB |
|
Square/Pulse |
|
Frequency Range |
100 mHz to 15MHz |
|
Rise/Fall time |
<15ns |
|
Overshoot |
<3% |
|
Duty cycle |
Square:50%;Pulse:0.4%~99.6% |
|
Min. Pulse Width |
30 ns |
|
Jitter |
500 ps |
|
Ramp |
|
Frequency Range |
100mHz~1MHz |
|
Linearity |
1% |
|
Symmetry |
0 to 100% |
|
Frequency Response Analysis (MDO‐2000AG only) |
|
Dynamic Range |
> 80 dB (typical) |
Input and Output
Sources |
Channel 1 or 2 |
|
Frequency Range |
20 Hz to 25 MHz |
Number of Test
Points |
10 to 90 points per decade |
Test Amplitude |
20 mVpp to 5 Vpp into High‐Z ;Fixed test amplitude or custom amplitude for each decade |
|
Test Results |
Logarithmic overlaid gain and phase plot |
Manual
Measurements |
Two pairs of tracking gain and phase markers |
|
Plot Scaling |
Auto‐scaled during test |
|
Miscellaneous |
Multi‐language
menu |
Available |
|
operation environment |
Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C |
|
On‐line help |
Available |
|
Time clock |
Time and Date ,Provide the Date/Time for saved data |
|
Dimensions |
384mmX208mmX127.3mm |
|
Weight |
3kg |
|
|
 |
|
